Mandatory / Regulatory Sign Board

All Mandatory or Regulatory Signs are circular in shape. Mandatory signs are to indicate the prohibition upon certain kind of vehicle maneuver and vehicle type like “overtaking prohibited” or “U-turn prohibited’ or “cycles prohibited” and restriction on parking like “parking prohibited” and limit on vehicle speed and size like “speed limit” and “maximum load limit”. They are with red circular ring and diagonal bars and with black symbols or arrows or letters on white background. The red ring indicates prohibitory regulation; and the diagonal red bar prohibits the action or movement indicated by the black symbol.

Mandatory signs giving positive instructions are circular with white symbol on a blue background. They indicate what driver must do compulsorily. For example, direction control signs are to compulsorily regulate certain movements wherever the restriction applies.

The exceptions in shape are the octagonal red STOP sign and the triangular GIVEWAY or YTIELD sign. These two signs provide indication about right of way to drivers.

Mandatory and regulatory signs need to be complied with and any violation of the o rules and regulations conveyed by these signs is a legal offence. Examples of these signs are shown in Fig.

Informatory/Guide Sign Board

All Informatory signs and Guiding signs for facilities are rectangular in shape.

Informatory Signs for facilities indicates location and direction to facilities like ”fuel station” or “eating place” or parking and shall be a symbol within a rectangular board with blue background.

Information signs in rectangular shap e are also used with destination names and distances with arrows indicating the direction. The colour patter of direction information sign is presented in Table 8.3.. These are used to give such information to road users which will help the m along the route in most simple and direct manner. Examples of these are shown in fig.

Cautionary/Warning Sign Board

Cautionary/Warning signs are triangular in shape with red border and black symbol in white background used to caution and alert the road users to potential danger or existence of certain hazardous conditions either on or adjacent to the roadway so that they take the desired action. These signs indicate a need for special caution by road users and may require a reduction in speed or some other manoeuvre, some examples of these signs are Hairpin Bend. Narrow Bridge, Gap in Median, School Ahead etc. An example is shown in Fig.

Overhead Gantry and Cantilever Sign Boards

Cantilever & Gantry Signs are Traffic Signs Mounted on an Overhead Support. They are usually built on high traffic roads with several routes and lanes. Gantries may also be cantilevered on one side. The underlying object of gantry signs is to direct cars driving on highways in the right direction.

Project Sign Boards

We are experienced in manufacturing project Sign boards that are to be installed to any Road Project on behalf of the Contractor on Sites. The main intent behind project Signage is to ensure that consistent information is being communicated and the sign provide visual consistency.

Hazards Marker and Chevron Sign Boards

We are trusted for manufacturing Hazard Marker & Chevron Sign Boards which are designed in compliance with IRC-67-2001 and Morth & H Specification. These signs contain important guidelines for the commuter and are designed with a fine durable finish. Made of Retro Reflective sheeting and ACP Base these signs are long lasting in nature and nor affected by adverse climatic condition.

Suggested Guidelines for Usage or Retro- Reflective Sheeting

Class of Sheeting	Type of Sheeting (ASTM)	Category Of Road
		National / State Highway	Major District Roads	Rural Roads	Urban/City Roads	Expressway
Class A	Type I	No	Yes	Yes	No	No
	Type II	No	Yes	Yes	No	No
Class B	Type III*	Yes	Yes	Yes	Yes	No
	Type IV	Yes	Yes	Yes	Yes	No
Class C	Type VIII	Yes	No	No	Yes	Yes
	Type IX	Yes	No	No	Yes	Yes
	Type XI	Yes	No	No	Yes	Yes

Color Patter for Direction Information Signs

Road Type	Background	Arrows / Border / Letters
Expressway	Blue	White
National Highway (NH)	Green	White
State Highway (SH)	Green	White
Major District Road (MDR)	Green	White
Village Road (ODR & VR)	White	Black
Urban / City Road	Blue	White

Thermoplastic Road Marking Paint

We manufacture thermoplastic rod marking material to comply with the following standards or as required by our customers. Hotmelt Thermoplastic Road marking material contains hydrocarbon resin, polymer, mineral oil, titanium dioxide, limestone extender, glass beads, and limestone aggregates in accordance with Indian & International Standards.

Median Marker

Made of Tough, Impact Resistant Injection Molded Thermoplastic Body.

Plastic Road Studs

We provide large range of plastic road studs for the clients according to their demands and expectations. The plastic glow road studs or road stud reflectors are extremely durables devices providing day and night visibility in adverse weather conditions. These are reflectorized i.e. reflect light from vehicle’s headlights back to driver’s eye. These provide a definitive and clear, outline of pavement markings during poor visibility condition like fog, rains and darkness.

Plastic Speed Breaker

Mode of study plastic speed breakers are highly resident to severe impacts and harsh weather conditions. Its dovetail interlocking subunits make it bind perfectly in to a one firm bump. The pre colored materials (Black/Yellow) and UV stabilizers keep them perpetually colorful. Studded with reflectors on either side, they are clearly visible to the motorists during nights hours. These breakers are ideal for private colonies, hospitals, schools, universities, security check post, parking areas, loading sites, etc. In cities. Easily removable, this breaker can easily be relocated as desired.

Product